Rivet Shelving is a boltless shelving system. Rivet Shelving locks together using rivets on the shelving beams that slot into keyholes in the vertical posts. Much like the Long Span Shelving the shelving beams have a recessed inside edge so that the shelf sits level with the top of the beam, eliminating any need for screwing the shelf down.

With Rivet Shelving not only does the shelving have a front and back shelving beam, but also side shelving beams. This means that every side of the shelf is supported by a Rivet Shelving beam. Therefore the Rivet Shelving beams are used to set the depth of the shelving unit. Essentially the available depths for Rivet Shelving are 450mm, 600mm, 900mm and 1200mm as listed below.

Rivet Shelving is available available in the following sizes:

Rivet Shelving uprights - 2150mm and 2450mm

Rivet Shelving beam lengths - 450mm, 600mm, 900mm, 1,200mm, 1,500mm, 1,800mm, 2,100mm and 2,400mm

Shelf options include MDF and Particleboard timber shelves. Rivet Shelving shelf supports are available for both 900mm and 1200mm wide shelves. Rivet Shelving is finished off with plastic end caps at the top and bottom of each Rivet Shelving upright